 |
 |
|
|
| IMED PC-1 |
|
Flow/Rate Range: 0.1-999 Ml/Hr
0.1-99.9 Ml/Hr (Micro)
0.1-999 Ml/Hr (Macro)
Accuracy: Plus Or Minus 5% (Titration)
Power Requirements: 90-130 Vac
50/60 Hz
Battery Life: 5 Hrs @ 125 Ml/Hr
Alarms: Battery, Occlusion, Infusion Complete, Internal Malfunction
Proprietary Set
|
| |
| IMED PC-2 TX |
 |
Flow Rate: .1-999 Ml/Hr
Volume: .1-9999 Ml
Kvo: 1 Ml/Hr If Set Rate Is Above 1 Ml/Hr Or Set Rate,
If Rate Is Below .9 Ml/Hr Or Below
Occlusion Rate: 10=/-2 Psi For Rates Over 30 Ml/Hr
Alarms: Check Ecd,Check Iv Set, Door Open, Restart Channel, Air-In-Line, Occlusion Patient Side, Parial-Occlusion Fluid Side, Occlusion Fluid Side,
Flo-Stop-Open Close Door, Battery Discharged
Power: 120 Ac - Battery Running Time: 8 Hrs At 125 Ml/Hr
Proprietary Set |
| |
| IMED PC-4 |
 |
Flow/Rate Range: 0.1-999 Ml/Hr
Power Requirements: 88-132 Vac
0.4 A - 50/60 Hz
Battery Life: With A New Fully Charged Battery
Approx. 8 Hours With One Channel Operating At 125 Ml/Hr
Or Approx. 4 Hours With 4 Channels Operating At 125 Ml/Hr
Alarms: Check Ecd, Check Iv Set, Door Open, Air-In-Line, Occluded,
Occluded-Patient Side, Occluded Fluid Side, Partial Occlusion-Fluid Side
Flo-Stop Open/Close Door
Proprietary Set |
| |
| IVAC 262 + |
 |
| Volumetric Pump Controller |
| |
| IVAC MEDSYSTEM III |
 |
Flow/Rate Range: 0.1-999 Ml/Hr Per Channel
Accuracy: Plus Or Minus 2% Normal Range
Plus Or Minus 5% With Extremes
Net Weight: 2.5 Lbs
Power Requirements: 110 Vac 60 Hz
Battery Life: 6 Hrs Minimum With All Three Channels Operating
at 125 Ml/Hr each
|
| |
| IVAC 570 |
 |
The IVAC Variable Pressure Volumetric Pump - Model 570 is designed to automatically regulate the flow of positive-pressure intravenous or intra-
arterial infusions.
|
| |
| Sigma 6000 |
 |
The Sigma 6000 Programmable Volumetric Infusion Pump is designed to provide accurate and reliable administration of all intravenous drugs and fluids. The program feature allows you to pre-set up to 12 different rate and volume limit combinations for the gradual increase or reduction of intravenous fluids and medications. Piggyback or secondary. The infusion rate is selectable from 0.1 ml/hr to 999 ml/hr. Abbott, Baxter Travenol, or Kendall McGaw micro or macro drip administration sets. It offers a high degree of versatility in tubing selection and operation.
|
| |
| Signature Edition Infusion Systems Single Channel |
 |
Flow Rate Range 0.1 to 999.9 ml/hr in 0.1 ml/hr increments
Volume to be Infused 0.1 to 9999.9 ml in 0.1 ml increments (primary)
KVO Flow Rate 0.1 to 20.0 ml/hr in 0.1 ml/hr increments
Width 7.6 in., Height 8.6 in., Depth 5.0 in.
Weight 6.6 lbs. Internal Battery Rechargeable nickel cadmium (NiCd)
Battery Capacity 4 hrs at 100 ml/hr (single)
3 hrs at 50ml/hr (dual)
Recharge Time 95% capacity in 4 hours
Power Requirements 100-120 V, 0.5 A, 50/60 Hz, 3-wire grounded system
(40 watts max.) |
| |
| Signature Edition Infusion Systems Dual Channel |
 |
Flow Rate Range 0.1 to 999.9 ml/hr in 0.1 ml/hr increments
Volume to be Infused 0.1 to 9999.9 ml in 0.1 ml increments (primary)
KVO Flow Rate 0.1 to 20.0 ml/hr in 0.1 ml/hr increments
Width 10.7 in., Height 8.6 in., Depth 5.0 in.
Weight 8.4 lbs. Internal Battery Rechargeable nickel cadmium (NiCd)
Battery Capacity 4 hrs at 100 ml/hr (single)
3 hrs at 50ml/hr (dual)
Recharge Time 95% capacity in 4 hours
Power Requirements 100-120 V, 0.5 A, 50/60 Hz, 3-wire grounded system
(40 watts max.) |
|
PARTS |
| Part Number |
Description |
|
| SM-20-000 |
Front Case Assy. Integer/Titration (Includes: Operate label, 2 seals, 2 retainers, keypad)
|
|
| SM-20-001 |
Front Case Assy. Integer Includes: Operate label, 2 seals, 2 retainers, keypad) |
|
| SM-20-002 |
Front Case Assy. PC-2 TX (Includes: Operate label, 2 seals, 2 retainers, keypad)
|
|
| SM-20-003 |
Snap Bracket |
|
| SM-20-004 |
Seal Retainer |
|
| SM-20-005 |
Hinge Pin |
|
| SM-20-006 |
Door Assembly (Right) includes cam lock |
|
| SM-20-007 |
Door Assembly (Left) includes cam lock |
|
| SM-20-010 |
Door Spring |
|
| SM-20-011 |
Nylon Washer |
|
| SM-10-013 |
Pump Mechanism Fractional PC-1 or PC-2
|
|
| SM-10-014 |
Pump Mechanism Fractional PC-1 or PC-2 |
|
| SM-20-015 |
Door Sensor Assy |
|
| SM-20-016 |
Pressure Transducer |
|
| SM-10-018 |
Air In Line Assembly (integer/fractional) |
|
| SM-10-019 |
Handle w/insert PC-1 |
|
| SM-20-019 |
Handle w/insert PC-2 |
|
| SM-20-020 |
Rear Case Assembly IntegerIncludes: transformer, comm harness, audio trans. pole knob, ac receptacle)
|
|
| SM-20-120 |
Rear Case Assembly Titration (Includes: transformer, comm harness, audio trans. pole knob, ac receptacle)
|
|
| SM-25-120 |
Rear Case Assembly PC-2TX Includes: transformer, comm harness, audio trans. pole knob, ac receptacle)
|
|
| SM-20-021 |
Transformer |
|
| SM-20-022 |
Audio Transducer |
|
| SM-20-023 |
Comm Harness |
|
| SM-00-029 |
Pole Clamp Label |
|
| SM-20-024 |
Pole Clamp Knob |
|
| SM-20-025 |
Transistor Harness Assy. Integer |
|
| SM-20-026 |
Transistor Harness Assy. Titration |
|
| SM-20-027 |
Audio Control Switch PC-2 |
|
| SM-20-022S |
Audio Transducer Board Mount |
|
| SM-20-111 |
Audio Control Switch Harness PC-2 integer |
|
| SM-20-111T |
Audio Control Switch Harness PC-2 titration |
|
| SM-20-028 |
Motion Sensor |
|
| SM-00-066 |
Power Cord 10Ft. (new) |
|
| SM-10-051 |
Pole Clamp Housing |
|
| SM-00-053 |
Cord Wrap |
|
| SM-10-058 |
Blank Door (right) |
|
| SM-20-061 |
Blank Door (left) |
|
| SM-00-092 |
Rubber Feet
|
|
| SM-10-098 |
A.C. Hood PC-1 |
|
| SM-10-099 |
A.C. Hood PC-2
|
|
| SM-10-047 |
A.C. Receptacle |
|
| SM-10-048 |
Battery Retainer |
|
| SM-10-049 |
Pole Clamp Wedge
|
|
| SM-20BD-004 |
Power Supply PC-2 Software VER 2 |
|
| SM-20BD-005 |
Logic/Analog BD Software VER 3 |
|
| SM-20BD-006 |
Display Board Software VER 3 |
|
| SM-20BD-007 |
Power supply BD Software VER 3
|
|
| SM-20BD-008 |
Display Board PC – 2 TX
|
|
| SM-25BD-009 |
Logic/Analog Board PC – 2TX |
|
| SM-25BD-010 |
Power Supply Board PC – 2TX |
|
| SM-25-070 |
L.C.D. Display Assy. PC – 2TX
|
|
| SM-20-007 |
Door Assy. CHNL A (Left) |
|
| SM-40-001 |
Door Assy. Inner CHNL B |
|
| SM-40-003 |
Door Assy. Inner CHNL C |
|
| SM-20-006 |
DPPR Assy. CHNL B (Right) |
|
| SM-40-002 |
Display Assy. L.C.D. |
|
| SM-40-BATT04 |
Lead Acid Battery |
|
| SM-20-004 |
Seal Retainer |
|
| SM-00-005 |
Hinge Pin |
|
| SM-00-010 |
Spring |
|
| SM-10-013 |
Pump Mechanism (Fractional) |
|
| SM-20-015 |
Door Sensor Assy. |
|
| SM-20-016 |
Pressure Transducer |
|
| SM-10-018 |
Air in Line Assy. (Fractional) |
|
| SM-00-024 |
Pole Clamp Knob |
|
| SM-PC-NBATT02 |
Nicad Battery |
|
| SM-00-053 |
Cord Wrap |
|
| SM-00-054 |
Power Cord |
|
| SM-40-008 |
A.C. Hood PC-4 |
|
| SM-40-010 |
Front Case Assy. (PC-4) (Inc: 4 Seals, 4 Seal Retainers, Operator Label) |
|
| SM-40-010 |
Rear Case Assy. (PC-4) (Inc: Transformer, comm. harn. Pole knob, AC recep)
|
|
| SM-40-012 |
Lead Screw and Wedge |
|
| SM-40-013 |
Battery Cover |
|
| SM-40-014 |
Pole Clamp Retainer |
|
| SM-40-015 |
Housing, BATT Extension |
|
| SM-40-016 |
Keypad |
|
| SM-40BD-017 |
Front Display BD Assy. |
|
| SM-40BD-018 |
Display BD Assy. CHNL A |
|
| SM-40BD-019 |
Display BD Assy. CHNL B |
|
| SM-40BD-020 |
Power Supply BD PC-4XL (12 Volt) |
|
| SM-40BD-021 |
Display BD Assy. CHNL C |
|
| SM-40BD-022 |
Display BD Assy. CHNL D |
|
| SM-40BD-024 |
Main Logic BD |
|
| SM-40BD-025 |
Controller BD |
|
| SM-40BD-026 |
Power supply BD (NON XL) |
|
| SM-40-028 |
Pole Clamp Assy. |
|
| SM-40-029 |
Transformer Assy. |
|
| SM-40-030 |
Display Complete Assy. |
|
| SM-40-BATT05 |
Lead Acid Battery (6 Volt) |
|
| SM-40-031 |
IMED PC-4XL Pump Complete |
| |
|
