 |
 |
|
|
| Baxter 6200 |
 |
Power Requirements: 120 AC Battery: Rechargable 8 volt-running
Time 5 hours at 125 ml/hr-24 hrs to recharge
KVO rate: 5ml - Rate is programmable
Uses standard Baxter Straight Line Set
Flow Rate:1-999 ml/hr
weight: 14 lbs
|
| |
| Baxter 6201 |
 |
Flow Rate: 1-99.9 ml/hr in 0.1 ml/hr or 1-1,999 ml/hr in 1 ml Increments
Battery 12 Volt-Running Time 6 Hrs Typical-8hrs To Reach 80% Recharge
Alerts: Stopped, Kvo, Insert Slide Clamp, New Rate, Pri Rate=0, Battery Lowsec Complete, Sec Program, Sec Rate, Sec Vtbi=0, Flow Rate, Check Vtbi, Pgm Deliv Enter Pgm, Pgm Deliv Clear All, Pmg Deliv Review Pgm, Ramp Pdp Enter Data, Ramp Pdp Rates High, Resume Pdp, Com Timeout, Ext.Comm Error
Antifree Flow Protection - Standard Staight Baxter Set
Alarm Messages: Check Set Loading, Air, Occlusion, Insert Slide Clamp, Upstream Occlusion, Door Open, Battery Low, Failure, Com Timeout
KVO rate: 5ml/hr - Rate is programmable Power: 120 AC |
| |
| Baxter 6300 |
 |
Dual Pump Version Of The Baxter 6200
Baxter Straight Line Sets
Power Requirements: 120 AC Battery: Rechargable 8 volt-running
Time 5 hours at 125 ml/hr-24 hrs to recharge
KVO rate: 5ml - Rate is programmable
Flow Rate:1-999 ml/hr
weight: 14 lbs |
| |
| Baxter 6301 |
 |
Dual Pump Version Of The Baxter 6201 / Baxter Straight Line Set
Flow Rate: 1-99.9 ml/hr in 0.1 ml/hr or 1-1,999 ml/hr in 1 ml Increments
Battery 12 Volt-Running Time 6 Hrs Typical-8hrs To Reach 80% Recharge
Alerts: Stopped, Kvo, Insert Slide Clamp, New Rate, Pri Rate=0, Battery Lowsec Complete, Sec Program, Sec Rate, Sec Vtbi=0, Flow Rate, Check Vtbi, Pgm Deliv Enter Pgm, Pgm Deliv Clear All, Pmg Deliv Review Pgm, Ramp Pdp Enter Data, Ramp Pdp Rates High, Resume Pdp, Com Timeout, Ext.Comm Error
Antifree Flow Protection - Alarm Messages: Check Set Loading, Air, Occlusion, Insert Slide Clamp, Upstream Occlusion, Door Open, Battery Low, Failure, Com Timeout KVO rate: 5ml/hr - Rate is programmable Power: 120 AC |
| |
| Baxter Colleague 1 and 3 |
|
Flow rate on each channel (primary): 0.1-99.9 mL/hr (0.1 mL increments)
1-1,200 mL/hr (1 mL increments)
Flow rate range on each pump channel: 0.1-99.9 mL/hr
(0.1 mL increments) 1-500 mL/hr (1 mL increments)
Volume to be infused: 0.1-99.9 mL/hr (0.1 mL increments)
1-9999 mL (1 mL increments)
KVO rate: 0.1-5 mL/hr (0.1 mL increments)
Configurable Sensor Settings
|
| |
| Baxter Colleague Single Channel |
 |
Auto Tube Loading, Configurable Performance Modes, Dose Calculator
(9 Different Delivery Modes), Label Library (64 Drug Labels) |
| |
| Baxter PCA II |
 |
Modes: PCA only, Basal plus PCA and Continuous Basal.
Program by mL or mg- Accuracy: plus or minus 3% average linear displacement.
Battery life: typical 30 days in PCA or PCA and Basal.
Batteries: 4 D alkaline or rechargeable.
Syringes: Baxter 50 mL Prefilled, Monoject 60 cc plastic and B-D 60 cc plastic.
Flow rates: 0.1 to 150 mL/hr depending upon program/cartridge.
Occlusion force: 9.5 plus or minus 1.3 pounds equivalent to 11 psig nominal.
Security: locking cover, lockable pole clamp, security code and program cartridge within cover.
Front panel controls: Start-Stop, Enter, History, Clear, power and decimal point. |
| |
| Baxter/Sabratek 6060 |
 |
Flow/Rate Range: 0.1-400 Ml/Hr (Standard Cassette Rate)
0.1-50.0 Ml/Hr (Microcassette Rate)
Accuracy: Plus Or Minus 5%
Net Weight: 13 oz.
Power Requirements: Batteries Or Ac Battery Adapter
Alarms: Low Bag, Air-In-Line, Cassette Not Installed, Door Open,
Down Occlusion, Up Occlusion, Hold, Low Battery, Empty Battery
Infusion Complete, Reprogram, Release/Remove Pca Cord
Malfunction, Rate Exceeds Microcassette Limit, Stuck Key
|
| |
| B-D 360 Infuser |
 |
Flow/Rate Range: 1.5-360 Ml/Hr (Infusion Time From 10-60 Minutes)
Accuracy: Plus Or Minus 3% Based On Delivery Time
Net Weight: 1 Lb. 15 Oz.
Including Batteries
Battery Life: 400 Hrs
Alarms: Occlusion, End Of Infusion and Low Battery
Syringe Driver Disengagement
|
| |
| Baxter AS40A |
 |
Accepts 1-60 mL disposable syringes
Full syringe volume delivered
Fully functional, tested, bio-med documentation accompanies pump
Excellent backup pump
Available while supplies last
Flow rate: .01-360 mL/hr - Weight: 2.75 lbs
Accuracy: Plus or minus 3% not counting syringe tolerance
Can be run from internal battery pack or while plugged into outlet
Battery: 120 VAC Battery life: 12 hrs at 2 mL/hr
Pole clamp included |
| |
| BAXTER AP II |
 |
Flow rates: Basal 0.1-9.9 mL/hr, PCA/Continuous mode 0.1-20 mL/hr,
Continuous mode 0.1-1000 mg/hr
LCD Screen, 8 function keyboard
Uses same sets and reservoirs as the Bard Baxter PCA
Requires a 100 mL or 250 mL reservoir and tubing set
PCA Dose, Bolus and priming rate: 90 ml/hr
Volume limits: 1-250 mL
Occlusion: 22 plus or minus 10 psi
Accuracy: 10%
|
| Model: Baxter 300 XL |
|
|
Power Requirements: DC: four "C" size Alkaline Batteries
Flow Rate Range: 5.31-77.4 ml/hr
Accuracy: Plus or Minus 3%
Alarms: Normal Operation
Delivery End/Occlusion
Battery Life: 400 hrs
Net Weight: 28 oz.
Time Scale
Battery
|
| |
| Baxter Infus O.R. |
 |
Power Requirements: DC: four "C" size Alkaline Cells
Flow Rate Range:: 0-600 ML/HR
Battery Life: 150 hrs (typical use)
Accuracy: Plus or Minus 3%
Alarms: Infusion Complete
Battery Malfunction: 4 hrs at Low Battery.
Net Weight: 2 lbs. w/batteries
|
| |
| Bard Harvard 150XL |
 |
|
Power Requirements: DC: four "C" size Alkaline Bateries
Flow Rate Range: Continuous Flat 5.5 in/hr
Accuracy: Plus or Minus 3%
Alarms: Normal Operation
Battery Life: 400 hrs
Delivery End Malfunction
Net Weight: 28oz |
| |
| SABRATEK 3030E |
 |
Display in English or Spanish language
Flow rate: 1-999 mL/HR
Volume limit range: 1-999 mL
KVO RATE: 1 mL/HR (1-9 mL/HR intermittent)
Power: 110 AC - Battery: 12V Rechargeable
Battery run time: 6 HRS AT 125 mL/HR
Alarms: Air in Line, Door Open, High Rate, Down Occlusion, Up Occlusion, Hold, Empty Bag, Low Battery, Empty Battery, Infusion Complete and Pump Malfunctions - Selectable occlusion alarms
Nonproprietary sets: straight line Baxter, Abbott and McGaw |
|
PARTS |
| Part Number |
Description |
Price |
| |
|
|
| SM-62-001 |
Front Housing |
$90.45 |
| SM-62-002 |
Rear Housing |
$101.35 |
| SM-62-003 |
Battery Cover |
$11.20 |
| SM-62-004 |
Power Supply Board |
$95.25 |
| SM-62-006 |
Front Panel |
$38.50 |
| SM-62-007 |
Pump Head Panel |
$68.45 |
| SM-62-008 |
Battery |
$30.00 |
| SM-62-009 |
Safety Clamp |
$94.65 |
| SM-62-010 |
Door Handle Assy |
$61.75 |
| SM-62-011 |
CPU (Logic) Board |
$202.75 |
| SM-62-012 |
Alarm Detect Motor dr.bd |
$135.45 |
| SM-62-013 |
Stepper Motor |
$127.60 |
| SM-62-014 |
Pole Clamp Assy |
$98.50 |
| SM-62-015 |
Pump Head Assy |
$489.90 |
| SM-62-016 |
Pump Head Assy (w/o monitor) |
$388.70 |
| SM-62-017 |
Front Case Assy (w/ front panel and pump head assy |
$688.85 |
| SM-62-018 |
Rear Case Assembly (w/ contents in rear case when disassembled |
$448.75 |
| SM-62-020 |
Inner Door Latch |
$5.85 |
| SM-62-021 |
Transformer |
$48.50 |
| SM-62-022 |
Display Board Assembly |
$121.35 |
| SM-6201-001 |
Baxter 6201 Front Panel Keypad |
$47.00 |
|
|
